The biggest issues faced with workmen most especially carpenters is the issue of dust. Even when great dust extraction fans are installed, it cannot totally curb the issues faced with dust rather there is great potential for particle and dust accumulation on surfaces of work. Therefore, there is a need to have a dust collection unit in any woodwork shop.
The quality of a good dust collector is to have a major impact on the cleanliness of your workshop or environment. It gives value to your work, keeps your entire collections clean and most importantly saves you from all forms of health hazard posed by dust. It’s also good to connect dust collector to miter saw so you won’t cause mold on the floor.
Dust collector might probably not be what you really need to have a wonderful output in your workshop, but it is also very imperative you have one especially when dealing with dust. Dust collector will improve the quality of air in your workplace or factory, you will definitely need this portable and easy to handle device.
There are various factors that must be considered be choosing any dust collector for a given work. The sound should be considered in respect to where we want to use it to work. We should always go for those that have a much more quiet sound output in order not to obstruct our work. It should also be able to completely get rid of dust.
The listed are the best dust collectors that can easily remove particles from the environment proficiently and as fast as possible, giving you the safest and most comfortable working environment.
The BUCKTOOL 1HP Wall-mount Dust Collector is proficient and a strong brand of tool. The machine is made with improved design and is made to work specifically in dust-prone areas, so as to get rid of dust efficiently.
It helps in adding value to woodwork by keeping the entire environment clean and safe from health hazards. The tool is made portable, handy and has features that make it work efficiently, and it also has more Al. die casting parts or tough stamped steel.
There are so many other features made with the tool that makes it work efficiently rather than laser guidance, LED lighting. It also has digital speed indication and variable speed adjustment that allows you to control the device to your taste. It comes with a 13-gallon capacity dust bag and the dust collector works with 4 in. 78’’ hose to pick up large chips from jointers, shapers, saws, and planers. It also has a simple mounting bracket and locking screws that make the machine run in the shortest frame of time.
It is made with a 550 CFM capacity that makes it very resourceful and will handle any woodworking machine. The dust collection is located next to dust production with minimal ducting, and static loss is minimal.
This product has a Motor of 1 HP, 120V/240V, single-phase, prewired 110V and a Motor amp that draws 9A/4.5A current which allows it work effectively and efficiently to avoid it from obstructing other machines that may require current to function well.
It has an Air suction capacity of 800 CFM that allows it to collect dust very fast without producing much noise that can alter or impair hearing. Therefore, this machine can be used to work effectively without using a hearing aid.
With a standard filtration of 2.5 micros, this machine can collect dust without exposing the user to any form of health hazard from dust. The portable base size of 15-3/4’’ by 39-3/4’’ allows the device to stand firmly with enough stability. The dust collecting bag can easily be replaced with a new one when the need arises as you can always get a standard size one.
The WEN 12-Gallon Dust Collector will absolutely keep your working environment clean and organized. It will get rid of sawdust in the entire work area effectively and under maximum control. The efficiency is highly dependent on the 5.7-amp motor moving over 660 cubic feet of air per minute.
You are connected to your favorite working tool with the 6-inch impeller combined with the 4-inch dust port inlet. It has a four 1-3/4 inch swivel casters lock that is put in place to prevent unnecessary movement and the solid design allows for simple storage and movement while working.
It also comes with a built-in wall mount that you can also remove the wheels and hang it on your workshop’s wall so that you can easily reach to the dust collection whenever the need arises.
It has an incredible WEN 10-foot Dust Hose and the WEN 20-foot Dust Hose that makes dust collection fun and easy. With this product, you have a 2-year warranty and a friendly customer care line.
The Shop Fox W1826 Wall Dust Collector is stylishly manufactured with a 2.5 Micron Filter Bag that allows you to collect dust neatly without being exposed to adverse health effect from dust. The devices can be mounted on the wall and are designed to capture dust right at the source, thereby getting rid of the limited effectiveness of a duct system.
It has a 537 CFM capacity that can effectively handle just about any hungry woodworking machine, and with no complicated channel system be sure that there will be a minimal loss in static pressure. With the simple wall mounted bracket and locking screw system, there is every assurance that you will safely be up and running within the shortest period of time.
Other incredible features are the 1-horsepower motor, 120 or 240V, prewired at 120V, 7 amps at 110V, and 3.5 amps at 240V. Window to gauge how much dust is in the bag and bottom zipper for easy dust disposal, Single 4-inch intake hole, 2.5 Micron bag with 2 cubic feet capacity and 44-inch height with bag inflated.
The Central Machinery 2 HP Industrial 5 Micron Dust Collector is for sure the definitive solution to make your clean up frustration come to an end. This device eliminates dust and the finest sawdust with absolute ease. It can also clean up dirt and debris effectively, and it comes with a clear bottom bag that allows you to see all that has been collected.
It is made with a four locking, swivel casters that enable the user to simply move the collected dust to any point when the need arises. It also has a lockable toggle switch that is attached to the device, and it is very easy to operate.
The 4″ diameter intake and 4″ diameter exhaust allows the dust collector to perform effectively without malfunctioning. The other incredible features that make it a very reliable dust collector includes 2 HP, 120 volts, 60 Hz, 20 amp peak, single-phase motor 3450 RPM, 1550 CFM air suction capacity, overall dimensions of 33″ L x 22″ W x 75-1/2″ H and weight of 103 lbs.
The POWERTEC DC1510 is a handy and portable dust collector. It gives a strong and complete dust or debris removal in any small working or pastime woodworking shop. It is made lightweight but also tough with a streamlined design.
It is constructed to work for many purposes for a very portable and effective use. You do not need to build an entire fixed Dust-Collection system or create separate connections to each and every machine as all you need to do is mount it, because of the hassle-free mobility that allows it collect dust and pollutants right at their origin. All that is needed to be done is just to attach the 6.5 ft flexible hose directly to whatever machine you are using, and the dust will be collected effectively.
This very resourceful machine can also be used as a static or motionless dust collection system if that will be ideal for your usage. It has a large built-in carrying handle that maximizes unit’s easy transfer.
The filter bag it comes along with help in filtering particles to the maximum and finest size and this will also aid in restoring fresh clean breathless air back into your work area. The nearness of the collector to any machine you are using will ensure the short length of channeling and potential loss of static pressure and more potent dust-removing action.
It will give you an improved air-quality and clean work surfaces that will make you enjoy the basic satisfaction of woodwork in a model working settings.
The Rikon model 60-105 1HP Portable Dust Collector is made to be conveniently used with the moderate size and it can be used for many small shop operations.
This unit gives the user or shop owner the resourcefulness to mount the unit on the wall for easy operation and dust collection. The built-in casters and handle can easily be moved to wherever position it needs to go in the shop. It has a single 4’’ dust port that can extract 660 CFM and this is very much sufficient for a single machine operation on the big chip makers like a jointer or planer.
There is also an adjustable pipe extension with chip collecting funnel that allows the suction end to be placed in a high position so that it can be used with lathes, workbenches and drill presses.
The Delta Power Equipment 50-723T2 1 Hp Dust Collector has 2 standard micron filtration bag that will help in keeping your shop in safer and cleaner condition. The Sewn in and snap-in filter bag ring is very fast, easy and abolish the need for cam-over-lock style Clamps.
It features a powerful TEFC induction motor for durable, long-lasting and smooth performance with protection from dust that can cause damage to the machine. The attached 6 mil plastic chip collection bag is made transparent that you can see and know when there is a need for the bag to be emptied.
The well-built and strong steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way makes dust collection an easy task.
The dust collectors listed above are no doubt a must-have, having taken a close look at the important features which include safety implement, especially in woodwork workshops that are prone to fire outbreaks. Other features like the sound, portability, and cost also make them a good device to reckon with.